Key Specifications/Special Features:

Features

   
LAN for configuration / Ethernet hub
Ethernet: 10/100 Mbps, RJ45
Protection: Built-in 1.5 KV magnetic isolation

 
Serial
No. of ports: 1 RS-232/422/485 port, male DB9, S/W selectable
RS-232 Signals: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422 Signal : Tx+ , Tx- , Rx+ , Rx – ( Surge Protect )
RS-485 Signal : Data+ , Data- ( Surge Protect )
Serial Line Protection: 15 KV ESD for all signals

 
Serial Communication Parameters
Parity: None, Even, Odd, Space, Mark
Data bits: 5, 6, 7, 8
Stop bits: 1, 1.5, 2
Flow control: RTS/CTS, XON/XOFF
Speed: 110 bps to 460.8+ Kbps

 
Power Requirements
Power input 1: 12 VDC

 
Environmental
Operating Temperature: -10 to 70°C (32 to 131°F), 5 to 95% RH
Storage Temperature:-20 to 85°C (-4 to 185°F), 5 to 95%RH

 
Regulatory Approvals
RoHS
EMC: FCC Class A, CE Class A

 
Software Features
Protocols: ICMP, IP, TCP, UDP, DHCP, BootP, ARP / RARP, Telnet, RTelnet, DNS, SNMP MIB II, HTTP, SMTP, SNTP
Serial mode: Virtual Com / TCP Server / TCP Client / UDP / Serial Tunnel with advanced settings of
    ■ TCP Alive Check Timeout
    ■ Inactivity Timeout
    ■ Delimiter for Data Packing
    ■ Force TX Timeout for Data Packing
4 Hosts simultaneous connection: Virtual Com / TCP server / TCP Client (only raw data)
Security: HTTPS, SSH v2
Programmable (Optional)
Event notification by email / SNMP trap
    SNMP Trap
    ■ Cold/Warm Start
    ■ DSR, DCD Changed
    ■ IP Changed
    ■ Authentication Fail
    SNMP Response
    ■ System MIB,
    ■ Interface MIB,
    ■ ICMP, IP, TCP MIB
    ■ UDP MIB
    ■ RS-232 MIB
Utilities: Windows NT/2000/XP/2003/VISTA
    ■ Device discovery
    ■ Auto IP report
    ■ Device setting (run-time change, no rebooting)
    ■ Access control list
    ■ Group setting
    ■ Device monitoring
    ■ Serial port monitoring
    ■ Log info
    ■ Group Firmware update batch

 
Virtual COM/TTY Drivers (WDM mode, configuration in windows device manager): Windows NT/2000/XP/2003, VISTA