|
Key
Specifications/Special Features:
486DX-800MHz CPU,128MB DDR2, 16-bit
GPIO, LAN,
COM x 4 (RS-232 x 4), WDT, USB2.0 x
4, PC/104, CF-2,
Single +5V DC-IN, IDE, Parallel;
optional RS-232/422/485,
SPI Flash, LCD/CRT,
Industry version optional -40℃ ~
+85℃(no LCD/CRT), -20℃ ~ +85℃(have LCD/CRT)
Specifications:
| System
Specifications |
|
Low-Power
CPU+System+I/O Chip:
|
486DX-800MHz/1GHz Single chip
|
|
BIOS:
|
AMI BIOS & LAN boot ROM on chip
|
|
DRAM:
|
128MB DDR2 soldered on board
|
|
LCD/CRT(Optional)
|
XGI Volari Z9M chip with 8MB RAM, 18-bit TFT LCD up
to 1600x1200
|
|
USB2.0 x 4:
|
Pin header, UDOC socket
|
|
16-bit GPIO:
|
Setup built in BIOS, 3.3V TTL Level
|
|
100/10M LAN on chip
|
|
Bus type:
|
PC/104 socket
|
|
Speaker:
|
Buzzer on Board
|
|
CMOS Backup:
|
Backup by 12887 or equivalent
|
|
PS/2 Mouse/ Keyboard:
|
pin header
|
|
IDE Port x 1:
|
support up to 2 x IDE devices
|
|
Parallel Port:
|
One bi-directional SPP/EPP/ECP
|
|
CompactFlash I / II Socket:
|
CF-II socket for IDE Flash Disk, or, IBM
1.8” MicroDrive 340MB/1GB HDD
|
|
Optional 4MB SPI Flash
|
|
COM x 4:
|
Selectable factory setting
RS-232 x 4,or RS-232 x 2 + RS-422 x 2,
or RS-485 x 4,or RS-232 x 2 + RS-485 x 2
or other
(COM1,2: RS-232/485, COM3,4: RS-232/422/485)
|
|
I/O setup built in BIOS
|
|
Watchdog Timer:
|
Programmable 1 ~ 512 sec.
|
|
Miscellaneous
Connectors/Jumpers:
|
Reset, HDD LED, Speaker, 2-pin power connector
|
|
Power Requirement:
|
Single +5V by 2-pin power connector
|
|
OS support:
|
WinCE, Linux, DOS
|
|
Dimension:
|
96mm x 91mm PC/104 mechanical
|
|
Operating Temperature:
|
0 ℃
~ +70℃,
optional
|
|
Industrial version -40℃ ~
+85℃(no LCD/CRT), -20℃
~ +85℃(have LCD/CRT)
|
|
|
User
Manual
Driver
;){kind=link}
;){kind=link}