The EX-9531 convert is an intelligent, stackable expansion module that connects to a PC USB port or USB Hub via the Universal Serial Bus(USB) port, providing one High-Speed RS-422 or RS-485 serial port(jumperless) The EX-9531 features easy connectivity for traditional serial devices.

The RS-232 standard supports full-duplex communication and handshaking signals (such as RTS, CTS) and The RS-485 control is completely transparent to the user and software written for half-duplex COM works without any modification.

The EX-9531's Opto-isolators provide 3000 Vdc of isolation to protect the host computer from ground loops and destructive voltage spikes on the RS-422/485 data lines.

EX-9531 also offer internal surge-protection on their data lines. Internal high-speed transient suppressors on each data line protect the modules from dangerous voltages levels or spikes.

The EX-9531 module derives the power from USB port and doesn’t need any power adapter.

Features:

Specifications:

n           USB Controller: Compatibility USB Specification 1.1 Standard

n           USB interface connector: USB type B

n           Isolation Side: RS-422/485

n           Converted signals: RS-422 or RS-485 Auto switching(jumperless)

n           Handshakel: RS422 support RTS & CTS handshake signals

n           Auto Switching Baud rate (bps):300 ~115.2 K BPS

n           Transmission and Receiving LED indicator

n           Isolation voltage: 3000 V DC

n           RS-422/RS-485 connector: plug-in screw terminal

n           Accessories (Supplied):NYLON DIN-rail Mounting Adapter SECC Panel Mounting Bracket

n           Plug-in screw terminal wiring: Accepts AWG 1-#12 to #22 (0.5 to 2.5 mm) wires

n           Power requirement: USB bus power

n           Case: ABS with captive mounting hardware

n           Power consumption: 0.65 W

n           Operating temperature:0 ~ 70 °C (32 ~ 158 °F)

n           Storage temperature:-25 ~ 85 °C (13 ~ 185 °F)

n           Humidity: 5 ~ 95%, non-condensing