Special Features:

■ 2-ports(RJ-45) Ethernet 10/100 Based-T Comm.
■ Daisy chain connection with auto-bypass protection
■ Support Modbus/TCP,TCP/IP,UDP,ICMP,ARP
■ Support Automatic DIO Sync.(peer-to-peer).
■ DO Auto-Off Time Mode.
■ Support 4 Relay output,0.6A@125VAC/2A@30VDC, RL0,RL1,RL2 Form C and RL3 Form A.
■ Support 7 Isolated single ended with Dry/Wet Contact(common source or ground)
■ Fully Photo-Isolation 3750Vrms
■ Protocol: ASCII Format & Modbus TCP

  

Specifications/ 

Interface: Communication 2-port(RJ45) Ethernet 10/100 Based-T comm, Daisy chain connection with auto-bypass protection. Protocol Modbus/TCP, TCP/IP, UDP, ICMP and ARP Led indication Led for power and Ethernet link status Isolation Digital Input: Input channels 7 (DI0~6) Input type: Dry contact: single ended with common source.      ● logic level 0 (active): Close to DI.GND      ● logic level 1 (inactive) : open Wet contact: single ended with common source/ground.      ● logic level 0 (active) : +5V to +30VDC max      ● logic level 1 (inactive): +2VDC max Logic level status can be inversed via ASCII/Modbus command Counter Input 300Hz counter input (32-bit+1-bit overflow) Optical Isolation Voltage 3750Vrms Relay Output: Output channels 4 (RL0,RL1,RL2 Form C(SPDT) and RL3 Form A(SPST NO) Relay type: Surge strength: 500V Relay contact rating: 0.6A/125Vac, 2A/30Vdc Operate Time: 3mS max. Release Time: 2mS max. Min Life: 5*105 ops Pulse output Each channel supports 300Hz pulse output Optical Isolation Voltage 3750Vrms Power requirement: Consumption 2.5W (Typical) Power input 10~30VDC Operating temperature: -10 ~ 70° C (14 ~ 158° F) Operating temperature: -25 ~ 85 °C (13 ~ 185 °F) Humidity 5~95% RH, non-condensing

Features: